CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.
Our mission is help customers enjoy premium cabinetry at the lowest prices possible. By buying direct from the RTA Store, you cut out the middle man and save all the extra markups that come along the way.
The RTA Store will replace or repair kitchen cabinets that have been subject to defects in materials and workmanship from the date of purchase for a period of 20 years. Warranty is limited to the original purchaser, for residential applications only. This warranty is expressly limited to repair or replacement of the defective part at the discretion of The RTA Store, and does not include labor for removal or replacement.
Stratton White Shaker
Ships in 3-10 business days
Accident Protection Warranty For Your Entire Kitchen! Learn More!
The Stratton White Shaker cabinet collection is a bright finish which will make any space feel welcoming. These cabinets will add a modern touch to your home due to its clean lines and light coloring. These cabinets are full overlay doors and come with stainless steel, full extension, soft close drawer glides and dovetail drawers.
| Shipping Time: |
Ships in 3-10 business days |
| Style: | Shaker |
| Door Frame: | 3/4" HDF |
| Door Center: | 3/8" HDF |
| Door Frame Width: | 2.5" |
| Center Panel Beveled Edge: | No, transition to center panel will be a straight, 90 transition |
| Sides: | 1/2" Plywood |
| Top & Bottom (Wall): | 1/2" Plywood |
| Bottom (Base): | 3/8"Plywood |
| Back Panel: | 1/2" Plywood *sink base and vanity sink base cabinets will not have full backs, vanity sink bases with drawers will only have a full back behind the drawer section(s)* |
| Shelves: | 5/8" Plywood shelves, edge banded |
| Base Cabinet Shelf Depth: | 10-1/2" |
| Drawer Box: | 5/8" solid hardwood, 3/8" plywood bottom, dovetailed |
| Drawer Glides: | Full extension, undermount, soft-close glides |
| Base Corner Supports: | High impact, injection molded plastic |
| Overlay: | Full |
| Hinges: | 6-way adjustable, soft-close, concealed hinges, 110 degree opening |
| Cabinet Interior: | Natural |
| Center Stile: |
None unless otherwise noted |
| Assembly Method: | Cam lock |
| Finish: | Polyurethane, UV resistant paint, with a water-based coating |
| Toe Kick: | 1/2" Plywood |
| Installation Rail: | 3/4" x 1-1/4" hardwood |
| Wall Cabinet Bottoms Finished (Exterior): | Yes |
| CARB Compliant: | Yes |
| Door Hinges: | Hinged right by default, base cabinet doors can be switched, but new holes may have to be drilled. Wall cabinet doors can be flipped. |
| Toe Kicks Included w/Base Cabinets: | Yes |
| Sides Panels Finished: | Yes |
| Installation/Designer Note: |
The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
Accessories
How to Install Molding
Drawer Glide
Blumotion Soft Close Hinge Adapters
Roll Out Tray
Base Cabinets
Single Door Base Cabinets: 09" - 21"
Double Door Base Cabinets: 24" - 30"
Double Door Base Cabinets: 33" - 48"
Blind Base Cabinet
Drawer Base Cabinet
Diagonal Corner Base Cabinet
Sink Base Cabinets: 24" - 30"
Sink Base Cabinets: 33" - 48"
Sink Base Cabinets: 60"
Wall Cabinets
Wall Cabinets: 09x30 - 21x30
Wall Cabinets: 09x42 - 21x42
Wall Cabinets: 24x12 - 36x12
Wall Cabinets: 24x30 - 48x30
Wall Cabinets: 24x42 - 48x42
Wall Cabinets: 30x15 - 30x18 (Plate Rack)
Wall Cabinets: 30x15 - 30x18 (Wine Rack)
Wall Blind Corner Cabinet: 24x30 - 36x30
Wall Blind Corner Cabinet: 24x42 - 36x42
Wall Diagonal Corner Cabinet: 24x30 - 27x30
Wall Diagonal Corner Cabinet: 24x42 - 27x42
Microwave Cabinet
Pantry Cabinets
Wall Pantry Cabinets: 18x84 - 18x96
Wall Pantry Cabinets: 24x84 - 24x96
Oven Cabinets
Oven Cabinet: 33x24x84 - 33x24x96
Oven Cabinet: 30x84 - 33x96
The following cabinet lines have similar specifications and door profile.
Login and Registration Form