Tuscan Cloud

Width 30" | Height 16-3/8" | Depth 24"

Drawer bench seat cabinet with an overall height of 16-3/8" and a drawer front height of 11-11/4". The cabinet will have the same constrution as other drawer base cabinets with an open top, and the interior drawer depth will be 19-5/8".

Width 30" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.

Width 30" | Height 34.5" | Depth 24"

2 full height door base cabinet with 2 shelves (shelves will not be included if roll outs are added).

Width 30" | Height 34.5" | Depth 24"

Base microwave cabinet with (1) 9" high drawer on bottom. Opening will be 24"W x 12-1/2"H. It can be widened on site up to 28" W x 19"H, if needed. The space from the shelf to the top of the cabinet is 20".

Width 30" | Height 34.5" | Depth 24"

Base oven cabinet with an opening size of 24"W x 21" H. The opening can be widened on site to a max cut out size of 28-1/2"W x 28-1/8"H.

Width 30" | Height 34.5" | Depth 24"

2 drawer base cabinet. Each drawer front measures 14-5/8" high.

Width 30" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-1/4" high.

Width 30" | Height 34.5" | Depth 24"

Farm sink base cabinet. Door heights are 17-1/2". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel will need to be cut on site to fit the sink and can be cut to accommodate a sink that's a maximum of 12" high.

Width 30" | Height 34.5" | Depth 24"

Sink base cabinet with 2 doors and 1 false drawer front. This cabinet will have no shelves.

Width 33" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 2 drawers.

Width 33" | Height 34.5" | Depth 24"

2 full height door base cabinet with 2 shelves (shelves will not be included if roll outs are added).

Width 33" | Height 34.5" | Depth 24"

1 door blind base corner cabinet with 1 drawer and 1 shelf. The actual width is 33", but must be pulled at least 6-1/2" from the corner, taking up 39" of wall space. It can be pulled a max of 12-1/2", taking up 45" of wall space. The door width is 12-3/4", the stile width is 10-1/4" and the blind opening width is 9-3/4". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately. When selecting the blind location, it is as if facing the cabinet, if Left is selected, the blind will be on the left side of the cabinet and the door will be on the right side. The door will always be hinged on the side closes to the blind side of the cabinet (for example, a blind cabinet with the blind on the left side will have the door hinged on the left side as well). It cannot be hinged closest to the outside of the cabinet because it will restrict access trying to get in and out of the cabinet.