Stone Shaker

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2 on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc... or the raw edge will have to be finished.

Width 30" | Height 1.5" | Depth 12"

Stem glass holder that is commonly installed under a wine rack, plate rack or other wall cabinet.

Width 13.375" |Height 1.5" |Depth 20.4375"

Roll out tray for an 18" base cabinet or pantry. Comes with full extension side-mount ball bearing glides.

The roll out trays have dovetail joints, the bottom of the trays are plywood and the sides are birch hardwood. *Please note this roll out tray will only work with this collection*

Width 48" |Height 1.5" |Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs.It can be trimmed up to 1/2” on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc...or the raw edge will have to be finished.

Width 60" |Height 1.5" |Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs.It can be trimmed up to 1/2” on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc...or the raw edge will have to be finished.

Width 96" | Height 3" | Depth 2"

Crown molding. Installed height will be 3" and it will stick out 2" from the cabinet.

Width 96" | Height 3" | Depth 3"

Large angled crown molding that is approximately 3/4" thick. Once installed, the molding will stick out from the cabinet about 3", and will be about 3" high.